HANNA’s new HI 9828 multiparameter portable meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated).

Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).

For measuring points within a 30 ft range or where GPS signals are not available, HI 9828’s Fast Tracker™ is invaluable for associating measurements with their locations.

HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.

The HI 9828 has a graphic, backlit display that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.

Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.

Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi sensor probe can be left underwater (IP68 standard).

GPS (Global Positioning System) Enabled

The new HI 9828 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m) so you can be sure that you return to the same location for repeated measurements.

Basic GPS Features

• GPS coordinates shown on the LCD with up to 10 measurement parameters
• GPS signal strength shown on LCD
• Number of satellites shown on LCD
• Logged data is embedded with GPS coordinates

Advanced GPS Features

• Users can associate GPS coordinates with alphanumeric locations
• Distances between current location and predefined locations are displayed arranged by distance
• Memorizes last location and time should signal be lost

Track Measurement Locations

Users can connect to GPS tracking software such as Google™Maps* to view locations where samples have been taken.

Measurement information is shown right on the map.

HI 929828 PC Software

• Manages logged data from the HI 9828
• Displays GPS coordinates with logged data
• Automatically maps samples on your PC (internet connection required)
• Shows location points on map along with measurement data

Fast Tracker™ Tag Identification System

HANNA’s iButton® Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user-entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

Features

• Display up to 12 parameters
• Track measurement locations with GPS
• Meter features IP67 and probe features IP68 waterproof protection
• Exclusive Fast Tracker™—Tag I.D. System simplifies test logging
• Graphic LCD with backlight
• Built-in barometer for DO compensation
• Quick Calibration feature
• Measurement check eliminates any erroneous readings
• Auto recognition of pH and pH/ORP probe
• Logger function records the data of all connected sensors
• Log-on-demand and automatic logging (up to 60,000 samples)
• Can display logged data as graphs
• USB for PC connectivity
• Auto-range of EC and TDS readings
• Good Laboratory Practice feature with the last 5 calibrations recorded
• All sensors are field replaceable
• Meter accepts both alkaline and rechargeable batteries
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

* GOOGLE™ is a registered trademark of Google, Inc. HANNA instruments® has no affiliation with Google™, Inc.

De technische specificaties van dit product:

Computer Interface		USB (with HI 929828 software)
Dimensions Meter		221 x 115 x 55 mm (8.7 x 4.5 x 2.2Â?)
Dimensions Probe		270 x 46 mm DIA (10.6 x 1.8"DIA)
Environment		0 to 50°C (32 to 122°F); RH 100%
Logging Interval		1 second to 3 hours
Logging Memory		Up to 60000 samples with 13 measurements each Up to 45,000 samples with 15 measurements each (GPS)
Power Supply		(4) 1.5V alkaline C cells (approx. 150 hours of continuous use without backlight) /(4) 1.2V rechargeable C cells (approx. 70 hours of continuous use without backlight)
Temperature Compensation		Automatic from -5 to 55°C (23 to 131°F)
Waterproof Protection		Meter IP67, Probe IP68
Weight		Meter: 750g (26.5 oz.); Probe: 750g (26.5 oz.)
Accuracy	Atm. Pressure	±3 mmHg within ±15°C from the temperature during calibration
Calibration	Atm. Pressure	Automatic at 1 custom point
Range	Atm. Pressure	450 to 850 mmHg; 17.72 to 33.46 inHg; 600.0 to 1133.2 mbar; 8.702 to 16.436 psi; 0.5921 to 1.1184 atm; 60.00 to 113.32 kPa
Resolution	Atm. Pressure	0.1 mmHg; 0.01 inHg; 0.1 mbar; 0.001 psi; 0.0001 atm; 0.01 kPa
Accuracy	Conductivity	±1% of reading or ±1 µS/cm whichever is greater
Range	Conductivity	0.000 to 200.000 mS/cm (absolute EC up to 400 mS/cm)
Resolution	Conductivity	Manual: 1 µS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm; 1 mS/cm; Automatic: 1 µS/cm from 0 to 9999 µS/cm; 0.01 mS/cm from 10.00 to 99.99 mS/cm ; 0.1 mS/cm from 100.0 to 400.0 mS/cm; Automatic mS/cm: 0.001 mS/cm from 0.000 to 9.999 mS/cm; 0.01 mS/cm from 10.00 to 99.99 mS/cm; 0.1 mS/cm from 100.0 to 400.0 mS/cm
Calibration	Conductivity, Salinity	Automatic 1 point with 6 memorized standards (84 µS/cm, 1413 µS/cm, 5.00mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm) or custom point
Accuracy	Dissolved Oxygen	0.0 to 300.0%: ±1.5% of reading or ±1.0% whichever is greater; 300.0 to 500.0%: ±3% of reading; 0.00 to 30.00 mg/L: ±1.5% of reading or 0.10 mg/L whichever is greater; 30.00 mg/L to 50.00 mg/L: ±3% of reading
Calibration	Dissolved Oxygen	Automatic 1 or 2 points at 0, 100% or 1 custom point
Range	Dissolved Oxygen	0.0 to 500.0% / 0.00 to 50.00 mg/L
Resolution	Dissolved Oxygen	0.1% / 0.01 mg/L
Accuracy	mV of pH input	±0.5 mV
Range	mV of pH input	±600.0 mV
Resolution	mV of pH input	0.1 mV
Accuracy	ORP	±1.0 mV
Calibration	ORP	Automatic at 1 custom point
Range	ORP	±2000.0 mV
Resolution	ORP	0.1 mV
Accuracy	pH	±0.02 pH
Calibration	pH	Automatic 1, 2, or 3 points with 5 memorized standard buffers (pH 4.01, 6.86, 7.01, 9.18, 10.01) or 1 custom buffer
Range	pH	0.00 to 14.00 pH
Resolution	pH	0.01 pH
Range	Resistivity	0 to 999999 Ω•cm; 0 to 1000.0 kΩ•cm; 0 to 1.0000 MΩ•cm
Resolution	Resistivity	Dependent on resistivity reading
Calibration	Resistivity, TDS	Based on conductivity or salinity calibration
Accuracy	Salinity	±2% of reading or 0.01 PSU whichever is greater
Range	Salinity	0.00 to 70.00 PSU (Extended Practical Salinity Scale)
Resolution	Salinity	0.01 PSU
Accuracy	Seawater Specific Gravity	±1 σt, σ0, σ15
Range	Seawater Specific Gravity	0.0 to 50.0 σt, σ0, σ15
Resolution	Seawater Specific Gravity	0.1 σt, σ0, σ15
Accuracy	TDS	±1% of reading or ±1 mg/L
Range	TDS	0 to 400000 mg/L or ppm (the maximum value depends on the TDS factor)
Resolution	TDS	Manual: 1 mg/L (ppm); 0.001 g/L (ppt); 0.01g/L (ppt); 0.1 g/L (ppt); 1 g/L (ppt); Auto-range scales: 1 mg/L (ppm) from 0 to 9999 mg/L (ppm); 0.01 g/L (ppt) from 10.00 to 99.99 g/L (ppt); 0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt); Auto-range g/L (ppt) scales: 0.001 g/L (ppt) from 0.000 to 9.999 g/L (ppt); 0.01 g/L (ppt) from 10.00 to 99.99 g/L (ppt); 0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt)
Accuracy	Temperature	±0.15°C; ±0.27°F; ±0.15K
Calibration	Temperature	Automatic at 1 custom point
Range	Temperature	-5.00 to 55.00°C; 23.00 to 131.00°F; 268.15 to 328.15K
Resolution	Temperature	0.01°C; 0.01°F; 0.01K

Accessoires bij dit product:

Accessoires
HI710045	kabel voor opladen HI 9828 batterijen
HI710046	kabel voor opladen HI 9828 batterijen via 12V adapter
HI7698281	USB-kabel voor HI9828
HI7698282	onderhoudskit voor HI769828 probe
HI7698283	kalibratiebeker voor HI9828
HI7698284	doorstroomcel voor HI769828 probe
HI920005	5 Indentificatie TAG's ' i-button' met houder
Probes
HI769828-0	pH -sensor voor HI769828 probe
HI769828-1	pH /ORP (REDOX) -combinatie elektrode voor HI769828 probe
HI769828-2	DO (Dissolved Oxygen_opgelost zuurstof)-module voor HI769828 probe
HI769828-3	EC / geleidbaarheid-module voor HI769828 probe
HI769828/10	Sensor voor HI9828, 10 mt kabel
HI769828/100	Sensor voor HI9828, 100 mt kabel
HI769828/20	Sensor voor HI9828, 20 mt kabel
HI769828/30	Sensor voor HI9828, 30 mt kabel
HI769828/4	Sensor voor HI9828, 4 mt kabel
HI769828/40	Sensor voor HI9828, 40 mt kabel
HI769828/50	Sensor voor HI9828, 50 mt kabel
HI769828/60	Sensor voor HI9828, 60 mt kabel
HI769828/70	Sensor voor HI9828, 70 mt kabel
HI769828/80	Sensor voor HI9828, 80 mt kabel
HI769828/90	Sensor voor HI9828, 90 mt kabel
Kalibratie vloeistoffen
HI9828-25	Kalibratie-oplossing voor HI 9828, 500 ml
HI9828-27	Kalibratie-oplossing voor HI 9828, 1 gallon
pH kalibratie vloeistoffen
HI7004L	Kalibratie vloeistof (buffer) pH 4,01 - 500 ML
HI7007L	Kalibratie vloeistof (buffer) pH 7,01 - 500 ML
HI7007P/5	Kalibratie vloeistof (buffer) pH 7,01 - 500 sachets * 20 ML
HI7010L	Kalibratie vloeistof (buffer) pH 10,01 - 500 ML
ORP kalibratie vloeistoffen
HI7021L	ORP (REDOX) Testvloeistof 240 mV-500 ML
HI7022L	ORP (REDOX) Testvloeistof 470 mV-500 ML
DO kalibratie vloeistoffen
HI7040L	Zero Zuurstof oplossing-460 ML
HI7042S	Elektrolyte oplossing voor DO (Dissolved Oxygen_opgelost zuurstof) sensor-30 ml
EC kalibratie vloeistoffen
HI7030L	Kalibratie vloeistof (buffer) 12,88 mS/cm - 500 ML
HI7031L	Kalibratie vloeistof (buffer) 1413 µS/cm - 500 ML
HI7033L	Kalibratie vloeistof (buffer) 84 µS/cm - 500 ML
HI7034L	Kalibratie vloeistof (buffer) 80000 µS/cm - 500 ML
HI7035L	Kalibratie vloeistof (buffer) 111800 µS/cm - 500 ML
HI7039L	Kalibratie vloeistof (buffer) 5.000 µS/cm - 500 ML
Onderhoud -en schoonmaakvloeistoffen
HI70300L	vloeistof: bewaarvloeistof - 500 ML
HI7061L	vloeistof: elektrodereiniging algemeen - 500 ML

Downloads bij dit product:

  Download gebruikershandleiding

  Geen datasheet beschikbaar

  Download documentatie (HI98280 GPS)

Om de eventuele gebruikershandleiding, leaflet(s) en/of MSDS datasheet(s) te kunnen bekijken is Adobe Reader benodigd.

U kunt Adobe Reader gratis downloaden.