The PCA 320 series of analyzers check pH and chlorine levels in applications such as pools and spas, drinking water and influent and effluent discharge of water to ensure public safety, prevent waste and protect the environment by reducing over dosage.

Features:

• pH regulation with both ON/OFF and proportional controls
• Separate alarms can be set for pH and chlorine controls
• Parameters can be sent through SMS
• Large graphical display with backlight
• User-friendly interface
• Can store up to 3500 data, that can be displayed or downloaded to a PC

De technische specificaties van dit product:

Alarm Relay		SPDT contact with 5A, 230 V resistive load
Baud Rate		1200, 2400, 4800, 9600 bps
Data Logging		up to 3500 data series
Dimensions		318 x 267 x 159 mm (12.5 x 10.5 x 6.25")
Dosing Relay		SPDT contact with 5A, 230 V resistive load
Drain Connection		10 mm (3/8") bar fitting
Enclosure		NEMA-4X standard, molded fiberglass polyster with transparent Lexan window
GSM Communication		2 programmable cellular phone numbers, alarm & information SMS using the HI 504900 module (optional)
Inlet Pressure		0.07 to 4 bar with no external pressure regulator (for pressure exceeding 4 bar an external pressure regulator is required)
Input Impedance		1012 Ohm
Power Supply		115 Vac or 230 Vac; 50/60 Hz; 20 VA (See Chart)
Recorder Output		0-10 mV, 0-100 mV, 4-20 mA or 0-20 mA
Sample Flow		100 to 300 mL/min
Sample Inlet Connection		12 mm (1/2") tubing diameter
Sample Temperature		5 to 40°C (41 to 104°F)
Serial Communication		RS485 port, galvanically isolated
System Error		SPDT contact with 5A, 230 V resistive load
Weight		5 kg (11 lb.) without reagents
Accuracy	Free & Total Chlorine	±8% ±0.05 mg/L
Calibration	Free & Total Chlorine	1 point
Delta	Free & Total Chlorine	selectable from 0.1 to 5 mg/L
Dosage	Free & Total Chlorine	proportional with 4-20 mA output
Minimum Detectable Level	Free & Total Chlorine	0.05 mg/L
Range	Free & Total Chlorine	0.00 to 5.00 mg/L
Resolution	Free & Total Chlorine	0.01 mg/L
Sampling Rate	Free & Total Chlorine	adjustable from 3 to 90 minutes
Accuracy	pH	±0.05 pH
Calibration	pH	1 or 2 point
Delta	pH	selectable from 0.1 to 2 pH (hysteresis adjustable from 0.05 to 2 pH)
Dosage	pH	ON/OFF with relay or proportional with 4-20 mA output
Range	pH	0.00 to 14.00 pH
Resolution	pH	0.01 pH
Sampling Rate	pH	adjustable from 3 to 120 seconds
Accuracy	Temperature	±0.5°C
Range	Temperature	5.0 to 75.0°C
Resolution	Temperature	0.1°C

Accessoires bij dit product:

Elektrodes
HI1005	PCA320 pH elektrode
Oplossingen
HI70490	PCA 300 free chlorine reagent 500 mL
HI70491	PCA 300 total chlorine reagent 500 mL
Accessoires
HI504900-2	interface voor GSM
HI70473	PCA tubing kit/druk regelaar om droog te leggen (2 *)
HI70474	Set van 6 extra tubes voor peristaltische pomp
HI70475	Set van 2 extra tubes voor peristaltische pomp
HI70476	Set van 6 reagentia fles tubing kit
HI70477	Set van 2 * extra tubes voor cel metingen
HI70478	Set van 6 * flesjes om extra tubes op te pompen
HI70479	Set van 6 * extra tubes van pomp naar Y aansluiting
HI70480	PCA 300 series-reagentia set vrij chloor
HI70481	PCA 300 series-reagentia set totaal chloor
HI70482	PCA 0,5 µm & 50 µm input filters
HI70483	PCA complete tubing kit
HI70483T	Complete Tubing Kit for HI84100 and HI84102
HI70484	PCA complete tubing kit (3 *)
HI70485	PCA Roerder motor
HI70486	PCA roerstaaven (2 *)
HI70487/N	Meetcellen voor PCA
HI70487/A	Adaptor set voor meetcellen
HI70488	PCA elektrovalve,60 Hz
HI70489	PCA elektrovalve,50 Hz

Selectie van andere producten uit de categorie Chloor, pH, ORP & Temperatuur Analyses:

Downloads bij dit product:

  Download gebruikershandleiding

  Geen datasheet beschikbaar

  Download documentatie (Agricultuur en horticultuur)
  Download documentatie (Agricultuur)

Om de eventuele gebruikershandleiding, leaflet(s) en/of MSDS datasheet(s) te kunnen bekijken is Adobe Reader benodigd.

U kunt Adobe Reader gratis downloaden.